Publicidad
Idiomas disponibles
Idiomas disponibles
5. Tighten all fasteners with torque wrench to 92 Lb.-Ft. (125 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
7. Reinstall the wiring, fasteners, fascia, trunk cover panel, and bottom panel
removed in step 1-3.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
6. Bottom panel trimming – locate the center of panel and trim 5'' tall by 3.5'' wide
area, see Figure 6. Make additional trimming if needed.
Sheet 5 of 15
24936NP
3.5''
5''
11-04-15
Rev. B
Publicidad
