Kohler K-7744 Guia De Instalacion página 4

Escutcheon
2. Installing Wall-Mount Handle - With Stops
Position the escutcheon on the valve body.
Thread the escutcheon lock sleeve onto the valve body until it
contacts the escutcheon. The sleeve will hold the escutcheon in
place.
Install the spline adapter about halfway onto the valve stem
spline.
Partially install the handle to the spline adapter, and check the
alignment of the handle. Lever handles should point down.
For further alignment, remove the handle, and reposition the
spline adapter on the valve stem spline until the handle
alignment is correct.
Secure the handle with the screw, and press the plug button in
place.
For vandal-proof configurations, insert the applicable red or blue
vandal-proof button, and secure it with the screw.
Repeat for the other handle.
113433-2-BB
Escutcheon
Lock Sleeve
Valve Stem Spline
Spline Adapter
Handle Assembly
Screw
Plug
Button
Vandal-Proof
Button
Vandal-Proof
(Red/Blue)
Screw
4 Kohler Co.