Fax +32 2 359 95 50
2. Hold the electric wine bottle opener firmly and depress the
down (or lower) button. The corkscrew spiral will turn in a
counterclockwise direction, enter the cork, and gradually
remove the cork from the bottle. When the wine bottle
opener stops, the cork has been fully removed from the
bottle.
3. Lift the wine bottle opener up and away from the bottle. To
remove the cork, depress the up (or top) button. The spiral will
turn in a clockwise direction and release the cork.
4. Always return the electric wine bottle opener to the charging
base when finished. This will protect the mechanism while it is
not in use.
CLEANING AND STORAGE
Clean the exterior surface of the product by wiping it with a soft,
•
damp cloth.
Do not use any abrasive cleaners or solvents, as product damage
•
will occur.
Do not attempt to clean any inside surfaces of the wine bottle
•
opener.
Store the product in a clean, dry place when it is not in use.
•
Store the appliance in a dry location. Do not place any heavy items
on top of appliance during storage as this may result in possible
damage of appliance. Store the charging adaptor in a clean, dry
location away from metal objects. Always check the plug before
use to assure metal items have not become attached.
ENVIRONMENTAL PROTECTION
If the appliance should no longer work at all, please make sure that it
is disposed of in an environmentally friendly way. Please do not put it
with your household waste.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Print only what is inside the frame.
6
Assembly page 6/16
USK CKS 36812 - 110622