Maintenance And Cleaning - Kalorik PPG 40738 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fax +1 305 430 9692
SPICE CONTAINERS
Before seasoning your meals, you can adjust the fineness of the
ground salt / peppercorns or spices, by turning the adjustment collar
(4) on the base of each container.
To do so, turn the collar clockwise for a coarser grind and
counterclockwise for a finer grind.
The coarseness adjustment can be done through 5 positions, each
marked with a distinct click sound. You can also select intermediate
grinding positions in addition to the marked positions.
Do not force the collar beyond the normal "Stop" setting.
Note: you can also use the spice containers to grind, manually, without
the motor block. Just keep the lid on and turn the lid clockwise to grind
(in this case the LED light will not light up)
ATTACHING THE SPICE CONTAINERS
Remove the motor block from the charging base by turning it
clockwise and lifting it.
Remove the lid of the container that you want to use.
Align the arrow on the motor block with the "Unlock" symbol on the
container.
Lock in place by turning the motor block counter clockwise, until the
arrow reaches the "Lock" symbol.
Grind the desired quantity of spice.
Proceed reversely to remove the spice container in place.
USE
With a spice container (5) attached to the motor block (7), hold the
appliance above the meal to season.
Press on the grind switch (8).
A LED light underneath each mill enables you to see how much you
are grinding, for a more precise seasoning.
Interchange the spice containers at will, season to taste.

MAINTENANCE AND CLEANING

Unplug the adapter before any routine maintenance or cleaning.
Disassemble the different parts of the appliance (motor block,
containers and lids) and clean them separately with a damp cloth.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
5
Assembly page 5/24
special
instruction
from
Team
Print only
PPG 40738 - 120501

Publicidad

Tabla de contenido
loading

Tabla de contenido