Zipper Maschinen ZI-HS10TN Instrucciones De Servicio página 28

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
D. Mounting the guard arm: Align the hole and locking
pin of the guard arm with the mount bracket. Secure
the guard arm with a M10 × 30 hex bolts, two
washers and a nut from the hardware bag.
E. Mounting the
retaining hook onto the frame and secure with two
M10×30 hex bolts and nuts.
F. Mounting the log lift: Position the log lift inside
the mounting bracket and align with mounting
bracket holes. Secure with a M16×90 hex bolt and
nut. Hook the lift chain to wedge slide guide.
ASSEMBLY
retaining hook: Position the
28