Splitting; Free A Jammed Log - Zipper Maschinen ZI-HS10TN Instrucciones De Servicio

16.2.2 Splitting

16.2.3 Free a jammed log

Stack as you work. This will provide a safer work area, by keeping it uncluttered, and avoid the
danger of tripping, or damaging the power cord.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
1. Place the log vertically on the support table, so
that it lies flat on its face. Press the left lever
to lower the extended log fixing claw against
the log to secure it. The extended log fixing
claw can be adjusted to fit logs with different
heights.
2. Hold the left press lever. Meanwhile, move the
splitter wedge down by pressing the right
splitting lever to the half stroke to split the log
slowly first and then press it to the end until
the log is completely split.
3. Return the splitter wedge to the starting
position. Operate the spring-loaded retract
control lever to lift wedge above the height of
log to be split.
OPERATION
31