Operating The Appliance - SEVERIN 7159 Manual De Instrucciones

Operating the appliance

Vacuum-cleaning with the floor nozzle
4 Operating the appliance
TIP: The floor nozzle can also be used without the suction tube in order to vacuum-clean fur-
niture, for instance. When doing so, make sure that the surface can withstand the contact
with the brush roller without sustaining damage.
Vacuum-cleaning in Power mode
In Power mode the hand-held vacuum cleaner operates with higher power and the brush roller rotates.
1. Attach the floor nozzle to the suction tube.
2. Press and hold for more than 1 second to switch on the appliance. – Power mode is activated.
3. Vacuum-clean the floor.
4. Press . – Eco mode is activated.
5. Press to switch off the appliance.
6. Empty and clean the dust container (see chapter "Maintaining the appliance").
Vacuum-cleaning in Eco mode
In Eco mode the brush roller does not rotate, the hand-held vacuum cleaner consumes less energy
and the operating time of the rechargeable battery is extended.
1. Attach the floor nozzle to the suction tube.
2. Press and hold for more than 1 second to switch on the appliance. – Power mode is activated.
3. Press . – Eco mode is activated.
4. Vacuum-clean the floor.
5. Press to switch off the appliance.
6. Empty and clean the dust container (see chapter "Maintaining the appliance").
For further information, see also illustrated Quick Start Guide.
Vacuum-cleaning with the 3-in-1 tool
TIP: The 3-in-1 tool can also be used without the suction tube in order to vacuum-clean fur-
niture, for instance.
1. Connect the 3-in-1 tool to the adapter and attach it to the suction tube.
2. Press and hold for more than 1 second to switch on the appliance. – Power mode is activated.
Press again as necessary. – Eco mode is activated.
3. Clean the floor.
4. Press (press
5. Empty and clean the dust bin (see chapter "Maintaining the appliance").
twice in Power mode) to switch off the appliance.
19