Hauck Roadster SL Instrucciones Para El Uso página 8

6. BRAKE (fig. 6)
GB
Press the rear brake down by foot to stop the rear wheels and push the stroller to check.
Attention: Always apply both brakes when parking the stroller.
7. ADJUSTING THE BACK REST (fig. 7)
The back rest is adjusted via the pull belt with clasp which is located at the rear part of the seat
upholstery. This enables the inclination of the back rest to be individually adjusted. Pull the belt
while holding the clasp to set the seat in sitting position. Press the button on the clasp and pull the
clasp down to release the seat to lying position.
8. ADJUSTING THE LEG REST (fig. 8)
Press both (left & right) buttons to bring the leg rest to the desired position.
9. ADJUSTING THE HANDLES (fig. 9)
Press both (left & right) buttons on the handle and bring the handle height to the desired position.
10. INSTALL THE FRONT BAR (fig. 10a, 10b)
Install the front bar just below the locking latches by pushing in the front bar into the housings
(10a). You will hear a click sound when they are secured onto the frame. Test the front bar
by pulling on it to make sure it is locked into place. To release the front bar, push the buttons
underneath and pull out the front bar (10b).
11. ASSEMBLE THE CANOPY (fig. 11)
Slide the canopy plastic housings on the catches above the locking latch on each side.
12. FOLDING AWAY (fig. 12):
Make sure the backrest is always in a recline position. Fold the canopy backward. Pull the
release levers on the right and left up at the same time. Press the handle down and fold the
stroller together. Close the transport lock on the side of the frame.
13. CHECKING THE PRESSURE OF AIR WHEEL
You can pump up the pneumatic tires with the tire pump. The tire pressure must not
exceed 2.0 bar (28PSI).
14. SECURE THE CHILD IN THE SEAT (fig. 13):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt (the
one that comes between the child's legs). Adjust the length of the belt to your child's needs. Always
ensure the straps are not twisted or caught on the stroller frame. Check the adjustment every time
you place the child in the seat and when the backrest is reclined. To release the harness, squeeze
& open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click into
position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has its own
length adjuster (D). To undo the harness, press the buttons and pull apart. "D" Rings are provided
for fitment of a full safety harness. The attachment points (D-rings) are located on side straps.
WARNING: (A child's safety is your responsibility.) The child should be harnessed in at all times and
should never be left unattended. The child should be clear of moving parts while making adjustments.
This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use
as instructed. Never use the harness without the shoulder straps.
UPKEEP AND MAINTENANCE
IN GENERAL
Please check the stroller functions on a regular basis. Make sure that the frame is stable, the screws
are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in
working order. Check the cover occasionally, making sure that the stitching is still firm, and inspect the
quality of the plastic parts. Any broken or worn working parts should be replaced immediately. Proceed
in the same manner with components that are broken, torn, defect or worn-out. Please use only original
hauck replacement parts. Do not subject your stroller to excessive sunshine. This can lead to a fading
of textile covers and plastic parts.
CLEANING THE COVERS
Remove the covers from the frame by loosening the loops, press studs or screws. Please read the
instructions on the sewn-in label before cleaning.
To clean the cover gently, wipe it down evenly using only a damp cloth. As long as there are no plastic,
wood or metal parts on or in the cover, it can be machine-washed at 86°F (30°C) and medium speed.
The cover should be air-dried, but not exposed to excessive sunshine. Please do not dry the cover in
the drier, to avoid shrinking. Do not re-fit the covers until they are completely dried.
CLEANING THE FRAME
Dry the stroller with a soft cloth after cleaning or after use rain or snow. Use only mild soapy water or
lukewarm water to clean the frame of your stroller. Plastic parts can be cleaned with mild detergent
cleaners.
WHEEL MAINTENANCE
Clean and service the wheels regularly. Apply corrosion or lubricant spray on the rim when necessary,
to protect against rust and deposits. Please make sure in winter that road salt residue is removed
immediately by using warm water and damp cloth. Remove dirt from the wheels and axles on a regular
basis.
8