Cable Management - PEERLESS Mounts ESA746PU Instalación Y Montaje

Cable Management

Attach cable tie anchor (G) to top or bottom of wall arm (A) using 8/32 x 1/4" phillips screw (H) as shown in fi gure
5
5.1. Secure cables to top or bottom of wall arm (A) using cable ties (F) as shown in fi gure 5.2.
Route cords inside arm slots of wall arm (A). Lock cords into place by snapping cord covers (I) onto mount as
shown in fi gure 5.3. NOTE: Be sure arrow on inside of cable covers (I) points toward screen as shown in detail 1.
Cables may also be secured to slot at bottom of wall plate using a cable tie (F) as shown.
H
F
G
fi g. 5.1
CORD
fi g. 5.2
I
DETAIL 1
CORD
F
CORD
fi g. 5.3
10 of 35
ISSUED: 01-15-11 SHEET #: 061-9061-2 02-01-11