Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tension Adjustment
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
• If screws become loose over time, tighten screws as necessary. Tighten screws to 50 in. • lb (5.6 N.M.) maximum
torque.
If more or less tension is desired in the arm pivot points, do the following:
6
• To increase tension, turn tension screw(s) clockwise using 5mm allen wrenchs (L). NOTE: Tighten screws to
50 in. • lb (5.6 N.M.) maximum torque.
• To reduce tension, turn tension screw(s) couter-clockwise using 5mm allen wrenchs (L). NOTE: Do not loosen
more than half a turn.
WARNING
TENSION SCREWS
11 of 35
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 01-15-11 SHEET #: 061-9061-2 02-01-11
© 2011, Peerless Industries, Inc. All rights reserved.
Publicidad
Tabla de contenido
