Operating Safety Precautions - Burndy PAT644-LI Strucciones De Seguridad, Funcionamiento Y Mantenimiento

OPERATING SAFETY PRECAUTIONS

Tools are NOT insulated for use on or near
energized conductors. Use of these tools
near energized conductors may lead to
electrical shock, causing severe injury or
death.
Pinch point hazard. Crimp ram operates at
high speed and force and can cause severe
personal injury. Keep all body parts away
from moving parts of the tool during
operation.
Hydraulic fluid under pressure. Do NOT use
any part of your body to locate a hydraulic
leak. Escaping fluid under pressure can
cause severe injury or death. If injury results
from escaping hydraulic fluid, seek
immediate medical attention to avoid
serious bodily injury.
Do NOT over-reach while operating this tool.
Loss of balance can cause serious personal
injury or death. Move closer to work area
and securely support yourself and your
work. ALWAYS keep proper footing and
balance.
Always clip one end of the lanyard to the safety ring on
the tool and the other end to a secure point to avoid
accidental drop of more than 6 feet. Failure to follow this
instruction may result in personal injury or tool damage.
Use all appropriate personal safety equipment when
handling, operating, and servicing this tool such as: safety
shoes, hard hat, eye and ear protection, work gloves, and
sleeves.
To help ensure safe operation of this tool, keep all safety
labels clean and legible. Replace labels when necessary
with new labels. See the PARTS SECTION of this manual
for information on reordering.
USE
Tools have been specifically designed for use with
BURNDY® Products. Use of non BURNDY® Products is
limited to those which conform to BURNDY® Technical
specifications applicable to tools. Use of non BURNDY®
non-conforming products with the tool shall be deemed
misuse or abuse.
3