Menu Navigation Overview - Bühler technologies TC-Standard (+) X2 Guía Rápida

TC-Standard (+) X2

5.1.2 Menu navigation overview

When pressing the OK button in normal mode, the display will
show the prompt code if the menu is locked. Use the ▲ and ▼
buttons to enter the correct code and press OK.
If an incorrect code or no code is entered, the menu will not be
unlocked and you will not be able to access all menu items.
If you forgot the password you can always enter master code
287 to access the menu; the menu will be unlocked.
The following image shows an overview of the menu struc-
ture.
Items with a dashed frame will only appear with the respect-
ive settings or with the respective status messages.
The factory defaults and settings ranges are specified in the
overview as well as under the respective menu item. The fact-
ory defaults apply unless otherwise agreed.
You can cancel entries and menu selections without saving by
pressing the ESC key.
16 Bühler Technologies GmbH
1
Menu:
top
Top Settings
Globale Einstellungen
4
Parameter:
5'C
Eingabe
-20 . . . 60 'C
7
oP
Auswahl
op haLf Lo hi
Optional
menu nav-
igation:
2
1. Menu designation
2. Display
3. Brief description
3
5
4. Value input
5. Factory preset
6. Parameter range
6
8
7. Selecting from the list of
values
8.
Factory preset
9.
9
Parameter range/selection
10
10. dashed box = Optional
BX440023 ◦ 12/2020