Krups FME1 Instrucciones De Uso página 5

Description
a Water Reservoir Lid
b Water Reservoir
c Carafe
d Heating Plate / Base
e Water Level Indicator
f Swing Out Filter Basket
g Filter Basket Soft Release Button
h Programmable Clock
i Cord Storage
j Duo Filter Water Filtration
k Water Filtration Holder
l Water Filtration Change Indicator
Models with Timer
m On/Off
n Hours and Minutes Setting Button
o Programming Button
p 1-3 Cup Flavor Setting Button
q Display
Description of Features
• Water Reservoir : Lid flips back for easy access.
• Carafe : Both thermal and glass carafes are designed with drip free pour spout and ergonomic
handle for easy pouring. Thermal carafe has a heat resistant plastic base.
• Heating Plate : On glass models with timer the heating plate can be programmed to stay on
from 1 - 5 hours. The default setting is 2 hours.
• Swing Out Filter Basket : Use #4 paper filters or a permanent filter.
• Filter Basket Soft Release Button : Opens the filter holder to insert filter and add coffee.
•1-3 Cup Flavor Setting : For brewing smaller quantities while fully extracting the coffee flavor.
• "Duo Filter" Water Filtration : Active vegtable based double acting anti-chlorine and anti-scale
filter. The anti-chlorine action of the filter brings out the most delicate flavors of the coffee.
The anti-scale action allows for longer periods between descaling.
Note: There is a rotary indicator on the top of the water filter holder. This indicates when the
"Duo Filter" should be changed. Place the index mark next to the month the filter should be
changed, referring to the chart below.
Example: If you replace the "Duo Filter" in January (1) you should set the indicator to March (3)
or May (5), depending on the hardness of your local water supply: position the number 3 or 5
opposite the index mark.
Water type
Soft water about 120
Hard water about 80
6
NPA USA. PM6.5 copie
Uses Replace Duo filter every:
4 months
2 months
6 4/12/06, 10:26