Button Function - AVM FRITZ!DECT 200 Instalación Y Operación

Security
 FRITZ!DECT 200 is intended for indoor
use only.
 FRITZ!DECT 200 is intended for operation
in a dry location that is free of dust,
protected from direct sunlight, and well
ventilated.
 FRITZ!DECT 200 devices cannot be
plugged together.
 FRITZ!DECT 200 can be subjected to a
maximum load of up to 2300 W/10 A, the
specifi ed output limit.
 Overloading can damage FRITZ!DECT 200
and result in malfunction or an electrical
accident.
 No devices that present a risk of fi re may
be operated unsupervised at the FRITZ!-
DECT 200 socket. Such devices include
electric irons and radiant heaters.
 Never let liquids get inside FRITZ!DECT
200.
 FRITZ!DECT 200 may not be altered,
converted, modifi ed or repaired except
by a qualifi ed technician.
 Frequent switching can shorten the ser-
vice life of electrical devices. Confi gure
automatic switching at frequent intervals
in FRITZ!DECT 200 only if the connected
devices are designed for such operation.
No liability will be accepted for corre-
sponding damage to these devices.
4
Requirements
To operate your FRITZ!DECT 200 you need:
 a 230 V socket, type E CEE 7/5 or F
CEE 7/4
 a FRITZ!Box 7390 with the latest
fi rmware
more FRITZ!Box models at:
avm.de/en
 a web browser that supports HTML5
The latest web browsers support
HTML5.
Buttons
FRITZ!DECT has 2 buttons with LEDs
Button Function
> Switches the socket on
On/Off
and off
> Deregisters from FRITZ!Box:
DECT
Hold the button down for at
least 6 seconds.
> Registers with FRITZ!Box:
Press the button until the
LED begins fl ashing. Then
press the DECT button on
the FRITZ!Box (see also
page 6).
5