Skil LT4823B-00 Manual Del Propietário página 16

To Start/Stop the String Trimmer
Before starting the string trimmer:
1. Make sure that you have a secure and balanced footing.
2. Stand upright and hold the string trimmer in a relaxed position.
3. Make sure that the cutting line is not touching the ground or any other objects.
4. Hold the string trimmer with both hands: one hand on the rear handle and one hand on the
front-assist handle.
To Start the String Trimmer (Fig . 12)
Press the lock-off button down and hold it in
that position. Press the trigger switch to turn on
the string trimmer. Release the lock-off button
and continue squeezing the trigger switch for
continued operation.
NOTICE: The motor will only start when both
the lock-off button and the trigger switch are
depressed.
To Stop the String Trimmer
Release the trigger switch to stop the string
trimmer.
WARNING
string trimmer during work breaks and after
finishing work .
Speed Selector (Fig . 13)
This string trimmer gives you the choice to
operate at a more efficient speed to extend
the runtime for larger jobs, or accelerate the
trimmer speed for high-performance cutting.
Push the speed selector forward or backward
to choose "HI" – high-speed, less energy-
efficient mode or "LO" – lower-speed, more
energy-efficient mode.
16
Always remove the
battery pack from the
Fig. 12
Fig. 13
Speed Selector
Trigger Switch
Lock-off Button