Storing The Trimmer - Skil LT4823B-00 Manual Del Propietário

Clean the Trimmer
1. Clear any grass that may have wrapped itself around the motor shaft or trimmer head.
2. Use a small brush or a small vacuum cleaner to clean the air vents.
3. Keep the air vents free of obstructions.
4. Clean the unit using a damp cloth with a mild detergent.
5. Do not use any strong detergents on the plastic housing or the handle. They can be
damaged by certain aromatic oils, such as pine and lemon, and by solvents such as
kerosene. Moisture can also cause a shock hazard. Wipe off any moisture with a soft, dry
cloth.
Sharpen the Line-Cutting Blade
WARNING
1. Remove the battery pack from the tool. Remove the line-cutting blade from the guard.
2. Wear proper eye protection and gloves and be careful not to cut yourself.
3. Secure the blade in a vise.
4. Carefully file the cutting edges of the blade with a fine-tooth file or sharpening stone,
maintaining the original angle of the cutting edge.
5. Replace the blade on the guard and secure it in place with the two screws.

Storing the Trimmer

1. Remove the battery pack from the trimmer.
2. Clean the tool thoroughly before storing it.
3. Store the unit in a dry, well-ventilated area,
locked-up or up high, out of the reach of
children.
4. Do not store the unit on or adjacent to
fertilizers, gasoline, or other chemicals.
5. Your trimmer is shipped with a storage rail
and storage adapter for hanging the saw.
To use them, securely mount storage rail,
horizontally leveled, on the wall with 2 screws
(not supplied). Use screws sufficiently strong
to hold the combined weight of the trimmer
and battery pack.
Attach the storage adapter and move it against
the mounting base of the storage rail.
Store the tool with the storage hole in the handle
over the tip of the storage adapter (Fig. 24).
Service
We recommend that all tool service be
performed by a SKIL Factory Service Center or
Authorized SKIL Service Station.
22
Always protect your hands by wearing heavy gloves when performing any
maintenance on the line-cutting blade.
Fig. 24
Storage Rail
Storage Adapter