GE AFQ08 Manual Del Propietario E Instrucciones De Instalación página 11

REMOVE THE SHIPPING PAD
4
Remove and discard the shipping pad
next to the compressor.
INSTALL THE MOUNTING RAILS
5
ONTO THE CASE
Remove the backing from the top
A
mounting rail seal strip and attach it to
the bottom of the top mounting rail.
Seal strip
Installation Instructions
Remove and discard
the shipping pad
Top mounting rail
Bottom
B
Attach the top mounting rail onto the top
of the case with 6 Type A screws.
C Attach the bottom mounting rail to the
bottom of the case from the bottom side,
using 4 Type A screws.
Type A
screws
Type A
screws
11
Type A
screws
Type A screws
Top
mounting
rail
Bottom mounting rail