Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Applicable
SIP-3020 SIP-4010
models
1
Remove the masking plate from the
storage, and check the detection
area and the mirror you use by
referring to the area chart.
Far area mirror
Rib
4
3
2
1
SIP-4010
SIP-404
10
0
10
[ft.]
10
0
5
0
5
[m]
5
0
2
3
1
2
3
4
If tree branches or other moving objects
are in the path of the detection beam.
SIP-404
SIP-3020CAM DN
2
Attach the masking plate to the mirror,
and secure it to the ribs.
Rib
3
Insert the ¿ xing rubber form to secure
the knob of the masking plate.
10
[ft.]
5
[m]
8
MASKING THE NEAR AREA SENSOR
8-1
Masking the Detection Areas using
Masking Plates
The near area mirror mounted in the main unit has 2 near
masking plates; one at the right side of this mirror and another
at the left side of this mirror. You can mask the detection area
by changing the position of these masking plates.
Cautions>>
You can mask the outside detection areas only; they are
areas 1 and 6. Use the area masking seals (an accessory)
to mask the other detection areas (see Step 8-2).
Applicable
SIP-3020 SIP-4010
models
1
Remove the masking plate
from the storage, and
check the detection area
and the mirror you use by
referring to the area chart.
Rib
6 6 4 2 5 3 1
Near area mirror
50
40
30
20
15
10
5
1
If tree branches or other moving objects
are in the path of the detection beam.
- 8 -
SIP-404 SIP-3020CAM DN
2
Attach the masking plate to the mirror, and
secure it to the ribs.
3
Insert the ¿ xing rubber form to secure the
knob of the masking plate.
10
0
10
20
30
40
50
0
5
10
15
6
2
5
3
4
Rib
[ft.]
[m]
Publicidad
Tabla de contenido
