Troubleshooting Guide; Specifications; Fcc Compliance Information - Beurer LB 27 Manual De Instrucciones

8. Troubleshooting Guide

Problem
Power LED does not
illuminate
Power LED illuminates
red
No mist
Mist has strange smell
Strange noise
Mist escapes underneath
Water Reservoir

9. Specifications

Type
Power Supply
Wattage
Capacity
Evaporation output
Sound Level
The specifications are subject to change without notice for purpose of improvement.

10. FCC Compliance Information

Cool Mist Humidifier LB 27
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com
Cause
Power Cord not getting power
Water level is too low
Water level is too low
No power
Device is new
Water is not fresh
Water Reservoir positioned incor-
rectly on the Base
Water level is too low
Device is not level
Water Reservoir positioned
incorrectly on the Base
Mineral deposits prevent proper
attachment of Water Reservoir to
Base
LB 27
110-120 V / 50-60 Hz
20 W
approx. 0.8 gal (3 l)
6 fl oz (180 ml) /hour
approx. 35dB
Solution
Connect the power cord to a working
electrical outlet
Fill Water Reservoir
Fill Water Reservoir
Connect the power cord to a working
electrical outlet
Clean Water Reservoir and let dry. Add
clean, fresh water
Remove and reposition Water Reservoir
correctly on the Base
Fill Water Reservoir
Place device on a firm, level surface
Remove and reposition Water Reservoir
correctly on Base
Inspect attachment between Base and
Water Reservoir for debris or mineral
deposits and clean if required
6