Console And Programs - Klarfit Treado Active Manual Del Usuario

EN
26
Open it:
Hold the rear end with one hand and then pull the cylinder to unfold the
treadmill. Do not stand under the deck when unfolding the treadmill. To avoid
injury, make sure that you have a firm grip when lifting or lowering the deck.

CONSOLE AND PROGRAMS

Control panel
Commissioning and general operation
1. Insert the plug into the socket and attach the magnetic safety key to the
console. Turn on the console by pressing the switch located on the front of
the treadmill.
2. The display shows [--]. Press the START/STOP button to start the
treadmill. After a 5-second countdown, the treadmill will start at a speed
of 1.0 km/h. Press the [+] or [-] button to increase or decrease the running
speed during training. Each time the button is pressed, the speed increases
or decreases by 0.1 km/h. The speed range can be adjusted between 1.0-
10 km/h.
3. Press the START/STOP button to stop the treadmill. You can also remove
the safety key. The treadmill will stop automatically and in all display
windows [---].