Klarfit Treado Active Manual Del Usuario página 36

EN
36
Lubricant application
Raise one side of the running belt. Put some lubricant under the middle of the
running belt on top of the running deck. Turn the treadmill on and let it run at
low speed for 3-5 minutes to distribute the lubricant evenly.
Note: Never apply too much lubricant. If excess lubricant runs out, wipe it
off immediately.
Checking the Treadmill for Correct Lubrication
Raise one side of the running belt and touch the top of the running deck. If the
surface is smooth, no further lubrication is required. When the surface is dry,
apply some lubricant.