jbc T210 Serie Manual Del Usuario página 2

Features
For C245 Cartridge range
The soldering iron handles for general purposes are suitable for both SMD components and jobs
with high power requirements (e.g. ground plane soldering).
General Purpose Handle
Ref. T245-A
Blue Handle
Ref. T245-PA
Non-slip Handle
Ref. T245-B
Soft Thermal Insulator Handle
Ref. T245-C
Easily replace the Grips for T245-A and T245-C using the slide-on tabs (Ref. 0016057 Supplied
with 4 grips).
1. Inserting tabs 2. Inserting handle
tabs
new grip
Insert the slide-on tabs into Push the grip with the tabs
the new grip. onto the handle.
2 2 2
Soft foam (Ref. 0016057)
Blue grip to easily distinguish it from other handles
Non-slip soft touch
Soft foam (Ref. 0016057)
3. Removing tabs
To remove the tabs, hold the
grip and pull them out. Use a
pliers if necessary.
Note: All models are supplied with a 1.5 m cable.
For C210 Cartridge range
The T210 handles are suitable for precision soldering jobs with medium power requirements.
Due to their size, they work with conventional and small SMDs as well as under a microscope.
Precision Purpose Handle
Ref. T210-A
Blue Precision Handle
Ref. T210-PA
Blue grip to easily distinguish it from other handles
For C470 & C245 Cartridge ranges
For intensive soldering jobs requiring continued high thermal power. They feature good thermal
insulation with a screw to fasten the cartridge which prevents rotation.
HD Purpose Handle HD Purpose Handle + 3m cable
Ref. T470-A Ref. T470-SA
Tri-lobed HD Handle
Ref. T470-ZA
Thermal Insulator HD Handle Thermal Insulator HD Handle + 3m cable
Ref. T470-FA Ref. T470-MA
Note: All models are supplied with a 1.5 m cable except those specified with 3 m.
w w w.jbctools.com
Tri-lobed for better handling
Foam
3 3 3