Mangos Soldadores - jbc T210 Serie Manual Del Usuario

Maintenance
Before carrying out maintenance, always unplug the stand and the tool.
- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of
the tool when it is in the stand. Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
8 8 8
w w w.jbctools.com

Mangos Soldadores

Ref. T210 / T245 / T470
9 9 9