GYS GYSFLASH 1.12 Manual Del Usuario página 7

GYSFLASH 1.12 LITHIUM
• Always ensure the Red clamp is connected to the «+» battery
terminal first. If it is necessary to connect the black clamp to the
vehicle chassis, make sure it is a safe distance from the battery
and the fuel/exhaust pipe. The charger must be connected to
the mains.
• After charging, disconnect the charger from the mains, then
disconnect the negative clamp from the car body and then
disconnect the positive clamp from the battery, in this order.
Connection :
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance :
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales or by an equally qualified person
to prevent any accidents.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic
Community).
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
• Equipment in conformity with Moroccan standards.
• The declaration C
our website (see cover page).
Waste management:
• This product should be disposed of at an appropriate
recycling facility. Do not throw away in a household bin.
(CMIM) of conformity is available on
‫م‬
EN
7