Dyna-Glo DGB610SSP Manual Del Usuario página 15

ASSEMBLY INSTRUCTIONS
16. Use two M4x10 bolts (DD) to assemble the
side burner valve assembly and control knob
bezel (H) to the right side burner
body assembly (K).
Hardware Used
DD
M4x10 Bolt
17. Use two M4x10 bolts (DD) to assemble side
burner (I) onto the right side burner body
assembly (K), (please ensure that the gas
valve orifice is correctly positioned inside the
side burner inlet (venturi)), and assemble the
ignition wire to the side burner electrode.
Then put the side burner rack (B1) onto the
right side burner body assembly (K).
Hardware Used
DD
M4x10 Bolt
Correct
Incorrect
Incorrect
16
x 2
17
x 2
15
K
I
K
DD
Ignition wire
DD
H H
Ignition Wire
B1