Before Use; Safety Instructions - JB Systems LED Rotogobo Manual De Instrucciones

ENGLISH
OPERATION MANUAL
Thank you for buying this JB SYSTEMS
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in
light show systems.
 A powerful logo projector based on a 60W white led
 Low gobo temperature: no need for expensive heat resistant metal or glass gobos!
 Can be used with plastic or paper gobos that can be produced by a standard laser printer!
 Normal metal gobos and glass gobos can of course still be used.
 Very simple controls by rotary knobs on the back of the projector:
 Speed control for rotating gobo
 Dimmer to adjust the output
 Beam angle: 18°

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the packing contains the following items:
 Operating instructions
 LED ROTOGOBO device
 Power Cable

SAFETY INSTRUCTIONS:

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than x meters
JB SYSTEMS
®
®
product. To take full advantage of all possibilities and for your own
CAUTION: To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
1/24
USER MANUAL
LED ROTOGOBO