Unpacking; Product Specifications - Optika Italy B-380 Serie Manual De Instrucciones

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Place the observation head onto the top of the arm and tighten the lock-screw. Insert the eyepieces into the eye
tubes and fix them with the tiny screws on the side of the eye tubes. Remove the plastic protection film from the
microscope stage.

Product specifications

B-383LD1
Head:
Eyepieces:
Nosepiece:
Objectives:
Focusing system:
Stage:
Condenser:
Illumination:
Power supply:
B-383LD2
Head:
Eyepieces:
Nosepiece:
Objectives:
Focusing system:
Stage:
Condenser:
Illumination:
Power supply:
Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
WF10X/20mm.
5 position on reversed revolving nosepiece. Ball bearing rotation.
IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, and PLAN 50x/0.75 (no cover slide).
Coaxial coarse and fine..
Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm.
Belt-drive in X direction.
Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Transmitted light: X-LED
Epi-fluorescence: high-power blue LED.
External power supply: Input 100-240Vac 50-60Hz / Output 6Vdc 1A.
Trinocular, 30° inclined, 360° rotating. Interpupillary adjustment 48-75 mm.
WF10X/20mm.
5-position reversed revolving nosepiece. Ball bearing rotation.
IOS E-PLAN 4x/0.10, 10x/0.25, 20x/0.40, 40x/0.65, and PLAN 50x/0.75 (no cover slide).
Coaxial coarse and fine.
Double layer mechanical sliding stage, dimensions 216x150mm, moving range 78x54mm.
Belt-drive in X direction.
Abbe condenser, sliding-in, N.A. 1.25 with centering system.
Transmitted light: X-LED
Epi-fluorescence: high-power white LED (for B ang G filtersets).
External power supply: Input 100-240Vac 50-60Hz / Output 6Vdc 1A.
, with manual brightness control.
3
, with manual brightness control.
3
Page 4