General; Care And Maintenance; Technical Data - Grundig Ocean Boy 510 Manual De Instrucciones

Going to sleep while listening to
the radio
• Press the SLEEP button briefly.
– The unit switches on the radio and the display
will show the previously set 'sleep' period and
the indicator ' '.
• The 'sleep' time can be adjusted from 90
minutes --> 10 minutes by pressing the SLEEP
button several times or continuously.
– After the preset sleep time has elapsed, the
radio will switch off automatically.
• The SLEEP function can be terminated prema-
turely by pressing the SNOOZE or ON/OFF
button.
Display backlight
The display backlight will be switched on for 8
seconds when any button is pressed.
Key Lock
The Key Lock function is used to prevent
accidental operation or changes to the settings
(e.g. when travelling, etc.).
t
• Set the Key Lock switch to the
– The indication ' LOCKED ' lights up on the
display when any button is pressed.
• To disable this function, set the Key Lock
t
switch back to the position.
X

GENERAL

position.
This unit meets the CEE regulations concerning
interference radiation.
This unit complies with the safety regulations
according to VDE 0860 / BS 415 and thus
with the international safety regulation
according to IEC 65.
This product fulfills the European directives
89/336/EEC, 73/23/EEC and 93/68/EEC
The type plate is located at the bottom of the
Placement of the set
Caution should be exercised if the set is placed
on furniture as surfaces are often coated with
lacquers and plastic finishes containing additives
which attack the material of which the feet of
the set are made, leaving stains which can only
be removed with difficulty or not at all.

Care and maintenance

• Only a soft cloth which picks up dust should
• If your set develops a fault, contact your
XYZ
• Do not expose the unit to moisture (e.g. drip-
ioioi oi
ioio ioi oi
ioioi oi
ABC
oioioi oi

Technical Data

ioio io oi
ioioi oi
ioio
Power supply
From external supply:
AC mains lead 230 V ~, 50/60 Hz
From batteries:
Radio:
Standby: 3.0 V 2 x IEC R03 (UM4/AAA size) cells.
Wavebands:
FM
MW
LW
Subject to technical alterations and alterations
in styling. E & O.E.
set
be used to clean the cabinet. Do not use
aggressive polishes or cleaning agents.
dealer.
ping or splashing) or to temperatures
exceeding 70˚C
6.0 V 4 x IEC R14 (UM2/C size) cells
87.5 - 108 MHz
522 - 1620 kHz
144 - 281 kHz
GB
19