Before You Play; Placing The F-20 On A Stand; Rear Panel Connections - Roland F-20 Manual Del Usuario

Before You Play

Placing the F-20 on a Stand

If you want to place the F-20 on a stand, use the Roland KSC-68 (refer to the KSC-68 Owner's Manual), KS-18Z or KS-12.
* Be careful not to pinch your ingers when setting up the stand.
KS-18Z
Align the front of the F-20
with the front of the stand.
Adjust so that the
height does not
exceed 1 meter
(Adjust the stand
to a level no higher
than the second
level from the
bottom).

Rear Panel Connections

USB MEMORY port
Connect a USB lash drive here.
• If a USB lash drive is connected, you can play
or save songs.
• If a wireless USB adapter (WNA1100-RL; sold
separately) is connected, you can use wireless-
compatible iOS apps (p. 8).
• The volume of the F-20's speakers will be
reduced if you connect a USB device to the USB
MEMORY port.
* Never insert or remove a USB lash drive while
this unit is turned on. Doing so may corrupt the
unit's data or the data on the USB lash drive.
* Carefully insert the USB lash drive all the way
in—until it is irmly in place.
USB COMPUTER port
If you use a commercially available USB cable to connect the F-20's USB
COMPUTER port to your computer's USB port, you'll be able to do the following
things.
• SMF data played back by MIDI-compatible software can be sounded by the
F-20.
• MIDI data can be transferred between the F-20 and your sequencer software,
opening up a wide range of possibilities for music production and editing.
4
Align the legs of the stand with
the screws of the rear panel.
PEDAL jack OUTPUT jack
Connect the included If you connect this jack to
damper pedal. ampliied speakers, the sound of
this unit will be heard through
them.
DC IN jack
Connect the included AC adaptor here.
KS-12
Adjust the width of the stand
so that the rubber feet of the
F-20 straddle the stand.
Keyboard side
Top view
PHONES jack
Connect headphones (sold separately).
* If you're connecting only one set of
headphones, you must connect them to
the PHONES jack.
If two people are using
headphones (sold
separately), connect
the headphones to the
PHONES jack and the
OUTPUT jack.
To prevent malfunction and
equipment failure, always turn
down the volume, and turn of
all the units before making any
connections.
Place the AC adaptor so the side with the indicator
(see illustration) faces upwards and the side with
textual information faces downwards.
The indicator will light when you plug the AC
adaptor into an AC outlet.
Power Cord
AC Outlet