Publicidad
Idiomas disponibles
Idiomas disponibles
Test bike stability by
Tugging on fork leg.
if forks move out of the skewer:
Open the lever and tighten the
adjustment knob more.
THE LEVER should close with firm
resistance against the forks.
BeFORe DRIvING AWAy:
• check the security of the forks; close the lever completely.
• close the wheel strap tightly against the rear wheel.
• Tighten the hex key on the rear crossbar.
• if Viper is mounted between the towers, and has been repositioned along the
crossbar, remember to close the red cover, and tighten the hex key again.
• don't forget your front wheel!
ATTACHMENT
HARDWARE CAN
LOOSEN OVER TIME.
CHECK AND TIGHTEN
IF NECESSARY, BEFORE
EACH USE.
K e e P T h e S e I N S T R u C T I O N S !
1033576B-5/15
Refer to
DO NOT TRANSPORT
BICyCleS WITh
attached baby seats,
panniers, wheel covers,
or full bike covers.
CHECK THE
REAR WHEEL.
Tighten the strap
if needed.
To release the
strap, push the
red button.
OFF-ROAD
DRIvING
is not
recommended
and could
result in
damage to
your vehicle
or your bike.
MAINTENANCE
The Viper has a
self-lubricating internal
mechanism.
it is not necessary to add
lubrication.
IF you neeD FuRtheR
technIcAL ASSIStAnce
oR RepLAcement pARtS:
please contact your dealer
or call us at (888) 925-4621
monday through Friday,
7:00 am to 5:00 pm
Pacific time.
This product is covered by
YAKIMA's
"Love It Till You Leave It"
Limited Lifetime Warranty
To obtain a copy of this warranty,
go online to
www.yakima.com
or email us at yakwarranty@yakima.com
or call (888) 925-4621
Publicidad
