Descargar Imprimir esta página

Environmental Protection - SATA 51081 Manual Del Uso

Llave de trinquete de batería de litio de 14,4v

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
Warning
The rotating direction can only be changed after the machine is completely still.
3) Work light
Press the switch, so the work light comes on; release it, so the work light goes out.
4) Spindle self-locking function
The spindle self-locking function allows the machine to operate as a hand tool. When the battery pack is exhausted, manually rotate
the machine to tighten or loosen the bolt.
Question and answer:
Why is the service life of same kind of battery pack different?
As mentioned above, if a battery pack is left unused for a long time, its service life may be shortened. This is the matter of charging
frequency. Several times of charging and use may improve the situation. In case of heavy work, e.g. when the large bolt is tightened, the
battery pack will run out soon. Do not charge the machine at the temperature below 0℃ or above 45℃ . Otherwise, the performance of
battery pack will be affected.
Maintenance:
Be sure to pull off the plug before repairing or replacing the machine.
The electric tool does not require additional lubrication or other maintenance. Do not wash the electric tool with water or chemical
cleaner. Wipe it with a dry cloth. Tool shall be stored under the dry conditions and the vent of motor shall be kept clean. Try not to use it
in a dusty environment.
Disposal of discarded battery pack:
To protect the natural environment, please recycle or dispose the battery pack properly. The battery pack contains a Li-ion
battery. Please consult the local waste disposal department for the information on recovery and/or disposal. Exhaust the
battery pack by using the electric hand drill, remove the battery pack, and wrap the pole port with strong tape to avoid short
circuit and leakage. Do not attempt to open or remove any part.

Environmental protection:

Disposal of waste:
The damaged machine, accessories and packaging materials shall be classified in detail for recycling in line with environmental
protection requirements.
All plastic parts have corresponding material marks to facilitate the classification and recovery.
18
51081/51082
中文
EN
DE
RU
KO
PT
JA
ES

Publicidad

loading

Este manual también es adecuado para:

51082