Kohler Sterling 66051100 Manual Del Usuario página 7

Troubleshooting (cont.)
Symptoms
3. Whirlpool stops by itself.
4. Whirlpool is noisy.
Sterling
Probable Causes
A. GFCI trips.
B. Suction blocked.
C. Jets are blocked.
D. The motor has overheated and
protection device has activated.
A. The pump banding straps that
hold the pump to the bath have
not been cut.
7
Recommended Action
A. Identify the source of fault and
correct it. If the problem persists,
refer to your installer or dealer.
B. Remove the obstruction.
C. Remove the blockage.
D. Check for blockage at the motor
vents. Remove blockage and allow
motor to cool. Check for suction
blockage. Remove the blockage and
allow motor to cool. Check for jet
blockage. Remove the blockage and
allow motor to cool.
A. Cut the pump banding straps with
tin snips.
1016905-5-K