Piercing Needle; Removable Single-Serve Pack Holder; Drip Tray - Hamilton Beach FlexBrew Manual Del Usuario

How to Brew a Single-Serve Pack
1
To open lid, lift lid release and
raise lid up.
4
Fill reservoir with cup or travel mug into which the coffee will be
brewed. 10 oz. (296 ml) of water is the MAX amount for single-serve
packs.
4
2
5
3
Place a pack into the single-serve
pack holder. Do not remove foil.
6
Lower lid until you hear a click
sound. This means your lid is
locked in place.
Burn Hazard.
w WARNING
To avoid contact with hot coffee
or water:
• Fill reservoir with cup or travel
mug of water into which the
coffee will be brewed.
• Fully insert cup or travel mug
on drip tray.
• Do not lift lid during the
brewing process.
w CAUTION
Cut Hazard.
Removable single-serve pack
holder has a sharp blade. Piercing
needle on underside of lid also
is sharp. Use caution when
handling.
NOTES:
• When brewing both sides, brew
time will be slightly longer.
• Use only cold water in reservoir.
• Do not use hot water.
• Do not reheat coffee in the
machine.
• Do not use creamer or nondairy
creamer in reservoir.
• After brewing hot cocoa single-
serve packs, brew a water-only
cycle without a single-serve
pack to avoid the possibility of
clogging the piercing needle.