Care And Cleaning - Hamilton Beach FlexBrew Manual Del Usuario

Care and Cleaning

All coffee makers should be cleaned at least once a month
(once a week for areas with hard water). This coffee maker requires
cleaning both sides.
1
4
Routine Cleaning of the Needle: The needle is located in the lid of the coffee maker. Bend a small paper clip
as shown; insert the tip of the paper clip through the hole/eye of the needle and up into the needle to ensure
grounds have been removed. Brew 2 or 3 times with cold water to make sure grounds have been removed
from the piercing needle.
8
2
5
w WARNING Shock Hazard.
Do not immerse cord, plug, or coffee maker in any liquid.
Cut Hazard.
w CAUTION
Removable single-serve pack holder has a sharp blade. Piercing
needle on underside of lid also is sharp. Use caution when handling.
Pour 3/4 cup (177 ml) of plain white
vinegar and 3/4 cup (177 ml) of cold
water into each reservoir. Place a
14-oz. (414-ml) cup or travel mug on
each cup rest. Press the I/O buttons
once. After 30 seconds, press the
I/O button to turn off, unplug unit,
and allow vinegar to clean. After
30 minutes, plug in unit. Press I/O
buttons and finish brewing. Allow
unit to cool. Empty cups and rinse.
Run 2 to 3 cycles of cold tap water.
The unit is cleaned and ready to
make coffee.
6
3
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product.