Thank you for deciding to purchase this high-quality product from the WAAGEN-
SCHMITT Company. You have purchased a set of scales of the highest technical
standard and proven quality.
Please read through this operating manual carefully before starting-up the scales for the
first time, and keep it in a safe place so that this information is available to you when you
need it.
1. Start-up
Inserting the battery:
Open the battery compartment cover on the underside of the scales and insert the
provided batteries (2 x 1.5V AAA). Please be mindful of the correct polarity of the
batteries (+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents or
abrasive cleaning products. Do not immerse in water. All plastic
parts of the scales should be cleaned immediately after contact
with fat, spices, vinegar and other strongly seasoned and coloured
foodstuffs. Avoid contact with citric acid.
2. Operation
Activating the scales:
Place the scales on an even and firm surface. To switch the scales on, press down on
the weighing platform with a pressure of at least 500 grams (Press-On Technology). The
backlight will turn on and "88888" will initially appear on the display. After the scales have
stabilised (Indicator: Stability symbol ▲), either "0 g" / "0.000 lb" / "0.00 oz" or "0.000 kg"
will appear, depending on the settings. The scales are now ready for weighing.
Plea se note: If a weight-value is shown on the display after activation, press the OFF/t
button to set the scales to zero.
Units of weight:
By pressing the un it button located to the left of the display, you can change the
country-specific unit of weight (g = gram / lb = pound / oz = ounce / kg = kilogram).
Please make sure that the scales are set to the weight-unit relevant to you.
Zeroing (tare) func tion:
By pressing the OFF/t button you can set the scales to "0 g" (Indicator: Tare symbol
"0). Place, for example, a bowl on the weighing platform, press the OFF/t button and
thus set the scales to "0 g" again. This process can be repeated as often as you like until
the total capacity of the scales (5 kg) is reached. After removing the weighed item the
total weight will be displayed as a negative value (Indicator: Minus symbol –).
2
Automatic deactivation of sca les:
If the displayed weight does not change within approx. two minutes, the scales
automatically deactivate. In order to conserve battery power, you can deactivate the
scales manually by holding down the OFF/t button for approx. 2 seconds.
3. Error Messages
"Lo"
=
Indication that the battery is flat – Please replace the batteries with two
1.5V AAA.
"EEE E"
=
Overload display – The 5 kg maximum capacity of the scales has been
exceeded. Immediately remove the load from the scales; otherwise, the
load cell could be damaged.
4. Technical Data
Carrying power x graduation: Max. 5 kg x 1 g
Dimensions:
163 mm x 212 mm x 21 mm
Batteries:
2 x 1.5V AAA (included)
Subject to technical changes due to further-development of the product.
2. Warranty
WAAGEN-SCHMITT guarantees the free correction of defects resulting from material or
manufacturing faults through repair or exchange 3 years from the purchase date. Please
get your warranty section filled out and stamped by the retailer when you make your
purchase. In case of warranty, return the scales to your retailer along with the warranty
section indicating the reason for your complaint.
Plea se note: Under extreme electromagnetic influences e.g. when operating a radio
device in immediate proximity to the scales, the indicator value may be affected. After the
disturbing influence has stopped, the product may once again be used as intended,
although a re-activation may be necessary.
Le gal duty to inform about battery disposal:
Batteries do not belong in household waste. As a consumer you are legally obligated to
return batteries. You can hand in your old batteries at the public collection point in your
community or anywhere where batteries of the same kind are sold.
Plea se note:
These symbols can be found on batteries:
Li
=
Battery contains lithium
=
Battery contains alkali
Al
=
Battery contains manganese
Mn
CR2032 (Li); AA (Al, Mn); AAA (Al, Mn)
3