Care And Maintenance; Cleaning; Disinfection; Sterilisation - ADE M118000 Instrucciones De Uso

8.1

Cleaning

Clean the device if required.
Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary
disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic
detergents.
Make sure that no liquid cleaning agent or water penetrates the scale and always follow the
manufacturer's instructions for use.
8.2

Disinfection

The display is made of polymethyl methacrylate (PMMA). PMMA is sensitive to
alcohol and can become cloudy if unsuitable disinfectants are used on it.
Only use disinfectants suitable for sensitive surfaces. Suitable disinfectants are
available from specialist dealers.
Ensure that the disinfectant is suitable for sensitive surfaces and polymethyl methacrylate (PMMA).
Follow the instructions on the disinfectant.
Disinfect the device at regular intervals using a soft cloth dampened with a suitable disinfectant.
Component
Tray
Housing, controls and display
8.3

Sterilisation

This device may not be sterilised.
8.4

Faults and error messages

8.4.1 Faults
Fault
The display shows nothing.
The display shows nothing.
The display shows nothing.
The display shows nothing.
The scale wobbles.
The displayed measurement
results do not change or are
obviously incorrect.
M118000+M118000-01-210305-Rev002-UM-en

Care and maintenance

Intervall
Before and After every measurement
If required
Cause
The scale has switched off
automatically.
Not connected to the mains.
The battery is empty.
No battery is inserted.
The scale is not levelled
properly.
Wrong operating mode
selected.
Measure
Switch on the scale.
Use the optional mains adapter
to connect the scale to the
mains.
Insert new batteries.
Insert batteries.
Adjust the leveling feet. Use the
spirit level to check the
horizontal position.
Toggle between weight and
length measurement.
Seite 31 von 112