Maintenance Plan; Maintenance Work; Replacing The Waste Bag; Replacing The Filter Bag - MIRKA 412 Manual De Instrucciones

7 Maintenance
7.1

Maintenance plan

7.2.1 Replacing the waste bag

7.2.2 Replacing the filter bag

7.2.3 Emptying dirt tank
7.2.4 Replacing filter element
7.2

Maintenance work

7.2.1 Replacing the waste
bag
Mirka 415M: Perform thoroughly
filter cleaning before replacing the
waste bag - see section 4.5.
Mirka 415M: During the following
work, ensure that dust is not unnec-
essarily spread around. Wear a P2
breathing mask.
7.2.2 Replacing the filter bag
Mirka 415 M: During the following
work, ensure that dust is not unnec-
essarily spread around. Wear a P2
breathing mask.
After finishing work
1. Open the retaining clamps
1
2. Carefully remove the waste
2
3. Close the waste bag connec-
4. Close the waste bag using
5. Dispose of the dirt in accord-
6. Insert a new filter bag into the
3
1. Open the retaining clamps
2. Carefully remove the filter
3. Close the filter bag connec-
4. Dispose of the filter bag in
5. Place a new filter bag into the
Mirka 412 / 415 / 415 M
As required
and remove the upper sec-
tion of the cleaner from the
dirt tank.
bag connection (1) from the
inlet fitting.
tion with the slide (2).
the cable binder (3).
ance with legal regulations.
cleaned tank as described in
the instructions enclosed.
IMPORTANT: Press the filter
bag connection firmly on to
the inlet fitting.
and remove the upper sec-
tion of the cleaner from the
dirt tank.
bag connection from the inlet
fitting.
tion with the slide.
accordance with legal regu-
lations.
cleaned tank as described in
the instructions (printed on
the filter bag)
IMPORTANT: Press the filter
bag connection on the inlet
fitting as far as possible.
english
9