Factory-Set - Trix 18 Serie Manual De Instrucciones

CV Discription
1 * 7-bit Adress
2 Minimum speed
3 Acceleration delay
4 Braking delay
*
5 ** Maximum speed
7 Version Number
8 Factory Reset / Manufacturer Recognition
17 Extended address (upper part)
18 Extended address (lower part)
bit 0: Travel direction polarity reversal
bit 1: number of speed levels 14 or 28/128
29 bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
bit 5: Adress size 7 bit / 14 bit
bit 0: Motor polarity reversal
51 * bit 1: Headlight polarity reversal
bit 2: Track polarity reversal
— Stopping Block
— Pulse width for motor control
Important: Changes in the settings market with ( * ) for the Selectrix mode of operation automatically lead to changes in the DCC mode of
operation and versa!
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.
DCC Value
0 - 127
0 - 15
0 - 255
0 - 255
0 - 255
10
8
CV 29, bit 5 =1
CV 29, bit 5 =1
0 / 1
***
0 / 2
0, 1, 2, 3, 4, 5,
0 / 4
6, 7, 32, 34, 35,
36, 37, 38, 39
0 / 32
0 / 1
***
0 / 2
0 - 7
0 / 4
—
—

Factory-Set

SX1 Value
DCC / SX1
3 / 1 0 - 111
2 / — —
3
2 1 - 7
3
134 / 5 1 - 7
60 / — —
131 / — —
255 / — —
255 / — —
6 / — —
0 4
— / 1 1 or 2
— / 1 - 4
9