Trix Köf II Serie Manual De Instrucciones página 17

Important: Changes in the settings marked with
Selectrix mode of operation automatically lead to changes in the
DCC mode of operation and vice versa!
Settings for different parameters:
CV
1
3
4
5
*
17
18
Bit 0: Travel direction polarity reversal + lighting
29
49
*
50
*
51
*
Other changes are not possible. The values set at
the factory have been selected to insure trouble-free
operation.
Description
Adress
Acceleration delay
Braking delay
Maximum speed
Extended adress (upper part)
Extended adress (lower part)
Bit 1: Number of speed level 14/28
Bit 5: Adress size 7 bit / 14 bit
Pulse width for motor control
Rule variant
Bit 0: Motor polarity reversal
Bit 1: Only lightning
Bit 2: Track Polarity reversal
for the
*
CV 29 Bit 5 = 1
CV 29 Bit 5 = 1
The operating instructions for your central unit (example:
Central Control 2000) will give you exact procedures for
setting the different parameters. With many systems the
values set at the factory can be read in the programming
mode.
DCC Value Selectrix Value
1 - 99
0 - 127
0 - 127
1 - 7
not necessary
not necessary
0/1 not necessary
0 - 3
0 - 3
0/1 not necessary
1 - 99
1 - 7
1 - 7
1 - 7
1 - 4
1 - 4
17