Storing A Redial Number - GE 25825 Guia Del Usuario

2. Enter the handset number you want to intercom/conference. The
receiving handset is paged.
HOLD 01:39 VOL1
PAGING
HANDSET 2
SENDING PARTY
3. The receiving handset must press the int/conf or talk/callback or spk
button to answer the intercom, then both intercom users may speak
privately. The external caller cannot hear the intercom conversation.
HOLD 01:40 VOL1
INTERCOM
HANDSET 2
SENDING PARTY
4. Press the int/conf button on the sending handset to initiate a
conference between handset 1 and handset 2 with an external caller.
NOTE: Press the exit button on the handset to cancel the intercom call, and
the sending party may continue to talk to the external party. Or the calling
party may press the talk/callback button to transfer the call to the receiving
party who may speak to the external caller independently.
NOTE: A handset can enter conference directly by pressing talk/callback
while the other handset is on an external call.
S R
TORING A EDIAL
1. Make sure your phone is OFF (not in TALK mode).
2. Press the delete/redial button on the handset.
3. Press CID/VOL (
4. Press the memory button, and the display shows ENTER NAME .
N
UMBER
or ) button to scroll to the desired redial number.
PAGING FROM
HANDSET 1
RECEIVING PARTY
INTERCOM
HANDSET 1
RECEIVING PARTY
35