Inserting A Pause In The; Sequence; Eviewing Hanging Or; Stored Numbers - GE 25825 Guia Del Usuario

5. Repeat step 5 in Storing a Name and Number in Memory.
6. Press the memory button again to confirm the entry. STORED shows
on the display for 2 seconds and the unit returns to standby mode.
NOTE: If the redial number has more than an 24 digits, it cannot be
stored in memory. "UNABLE TO STORE" is displayed.
I P
NSERTING A
If a pause is needed to wait for a dial tone press the # pause button on
the touch-tone pad to insert a delay in dialing sequence of a stored
telephone number (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as one digit and
shows as "P" in the dialing sequence.
R , C
EVIEWING HANGING OR
T R :
O EVIEW
1. Make sure the phone is OFF (not in talk mode).
2. Press the memory button, and the display either shows EMPTY or the
number of stored records.
3. Press the CID/VOL (
T C :
O HANGE
1. Repeat the steps from 1 to 3 in Reviewing, Changing or Deleting Stored
Numbers.
2. Press the memory button, the display shows ENTER NAME .
36
D
AUSE IN THE
D
STORED 50
or
317 ‐ 123 ‐ 4567
S
IALING EQUENCE
S
ELETING TORED
MEMORY
) button to review the memories.
MEMORY
PETER CHAN
N
UMBERS