FORWARD-FACING INSTALLATION WITH
Adjust child restraint to Upright position
(fig. a). Flip recline feet out for
forward facing use.
stored. (see fig. b, pg. 41)
Place
forward-facing
LATCH
anchors (fig. b). Belt must lay flat and
not be twisted. Pull connectors to be
sure they are securely attached (fig. c).
LATCH
belt is
anchors.
LATCH
Press down firmly in center of child restraint to
LATCH
belt by pulling adjustment belt (fig. d).
and does not slip from the tightened position.
If it does not stay tight, try another seating
hardware (B) and tighten adjustment belt to
Belt must lay flat and not be twisted.
LATCH
20
LATCH
(fig. e).
(A) to anchor
(fig. f).
LATCH
from