Removing Clogs - Panasonic MC-V5004 Instrucciones De Operación

Hose
Tuyau
Manguera
Cover
(Suction Inlet)
Couvercle
(entrée d'aspiration)
Cubierta
(Abertura de
aspiración)
Motor Protector
Dispositif de
protection
du moteur
Protector del
motor
Short Hose
Tuyau court
Manguera corta
+
Short Hose

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum.
Pull open suction inlet and check for
clogging.
Disconnect hose from short hose and
check the hose for clogging.
Plug in vacuum cleaner and turn on.
Stretch hose in and out to remove
clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose.
Tuyau court
Manguera
Reinstall lower plate.
corta
- 32 -