HQ-Power STUDIO BEAM 150 Manual Del Usuario página 8

7. Cleaning and Maintenance
1. All screws for installing the devices or parts of the device have to be screwed down tight and
must not be corroded.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be modified or tampered with e.g. do not drill extra holes in
mounting supports, do not change the location of the connections, ...
3. The electric power supply cables must not show any damage. Have the device installed by a
qualified technician.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts apart from the lamp. Contact your dealer for spare parts
if necessary.
7. Replace worn-out mechanical parts and make sure the mechanical parts are balanced.
8. Technical Specifications (see also fig. on p. 9)
Power Supply
Power Consumption
Dimensions
Total Weight
Lamp
Max. Ambient Temperature
Max. Housing Temperature
Motors
The information in this manual is subject to change without prior notice.
VDP150MH6
max. 230VAC/50Hz
max. 300W
320 x 280 x 460mm
14kg
1 x 230V / 150W HTI, GY9.5 socket
45° C
75° C
6 micro motors
8
VELLEMAN