Rointe 1000RAD Manual De Instalacion Y Uso página 11

PALAOS VERTICAL RADIATOR EN
The display will show the word "DAT" and then suggests the day of the
week. D1 corresponds to Monday, D2 to Tuesday and so on.
Use the INCREASE button to set the current day of the week, e.g.
if it's Thursday press the button 4 times until you reach D4.
Press the MODE button to confirm the day and exit the setting.
Once the time has been set, it will stop flashing.
If you product is in STAND-BY mode and you wish to turn it on, press
the button for 2 seconds.
5.3 MANUAL modes
There are 4 Manual operating modes: Pilot Wire, Comfort, Night and Anti-Frost.
PILOT WIRE mode (only available on request)
The Pilot Wire is a special communication protocol that allows an
external unit or control unit to control the radiator. It's shown on the
display by an arrow pointing to the house symbol.
To activate Pilot Wire mode, press the MODE key once. The
message "FP" will appear briefly along with an acoustic signal.
IMPORTANT: This function is not available unless requested, even if
it is displayed on the menu.
CONFORT mode
Comfort mode is shown on the display by an arrow pointing to the sun
symbol and the Comfort temperature on the screen.
To activate the Comfort mode, press the MODE key once. The
message "CON" will appear briefly along with an acoustic signal.
You can set the desired temperature with the INCREASE and
DECREASE buttons. The radiator remains on until the room reaches
the selected temperature.
This selected temperature is used during the WEEKLY
PROGRAMMING mode (section 5.4) as the temperature set for the
periods in Comfort mode.
11