Rointe 1000RAD Manual De Instalacion Y Uso página 13

The programming schedule is displayed on the left side of the screen
by a succession of lines that representing 24 hours of the day. An
arrow at the top of the screen indicates the operating mode (Comfort
or Night).
The temperature selected for that mode is shown on the display.
To modify the temperatures of the Comfort or Night modes, access
the corresponding mode and then use the
DECREASE buttons to modify the temperature parameters.
5.4.1 WEEKLY PROGRAMMING modes
In order to proceed to the weekly programming, you must:
• Have established the correct time and day of the week (section 5.2)
• Be in PROGRAMMING mode (press the
appears on the screen. "FP" will appear first, then "PRO".)
In this mode, it is possible to program each day of the week independently.
1. Select the day with the
(D1 = Monday, D2 = Tuesday, etc.). Press the
All the time bands for the day will then be displayed.
2. The lower screen shows the time interval that must be programmed for each
hour. Press
DECREASE to activate the Night mode temperature for that hour. Comfort
mode is indicated by a strip on the side bar. After each selection, the time
interval will progressively advance (00h, 01h, 02h, 03h...).
3. The strips will only been seen for the time bands that are active in Comfort
mode.
4. Once you have configured all hours of the day, press the
and then select the remaining days you wish to program e.g. D2 - D7.
5. Press the
Example
Set the Comfort mode on Fridays from 7am to 9am, and from 5pm to 9pm keeping the rest
of the day in night mode:
• Press for
• Choose Friday (D5) by pressing the
INCREASE and
INCREASE to activate the Comfort mode temperature OR the
MODE button for 5 seconds until the word "END" appears to save.
5 seconds until "PRO" appears.
PALAOS VERTICAL RADIATOR
INCREASE and
MODE button for 5 seconds until "PRO"
DECREASE buttons
MODE button to confirm.
button 5 times and then press
EN
MODE button once
to
13