STERWINS ELM1-33P.4 Instrucciones De Montaje, Utilización Y Mantenimiento página 228

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
SAFETY INSTRUCTIONS
·Do not tilt the machine when switching on the motor, except
if the machine has to be tilted for starting. In this case, do not
tilt it more than absolutely necessary and lift only the part,
which is away from the operator.
·Do not start the machine when standing in front of the
discharge opening.
·Do not put hands or feet near or under rotating parts.
·Keep clear of the discharge opening at all times.
·Do not transport the machine while the power source is
running.
·Stop the machine, and remove the disabling device. Make
sure that all moving parts have come to a complete stop
whenever you leave the machine, before clearing blockages
or unclogging chute, before checking, cleaning or working on
the machine, after striking a foreign object.
·Inspect the machine for damage and make repairs before
restarting and operating the machine; if the machine starts to
vibrate abnormally (check immediately), inspect for damage,
replace or repair any damaged parts, check for and tighten any
loose parts.
·Pull the plug from the socket:
- Whenever you leave the machine;
- Before clearing a blockage;
- Before checking, cleaning or working on the appliance; after
striking a foreign object. Inspect the appliance for damage
and make repairs as necessary;
·Keep all nuts, bolts, and screws tight to be sure the appliance
is in safe working condition.
·Check the grass box frequently for wear or deterioration.
·Replace worn or damaged parts for safety.
227
227
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido