STERWINS ELM1-33P.4 Instrucciones De Montaje, Utilización Y Mantenimiento página 237

FR
5. OPERATION
ES
mower for the first time,raise the cutting position to the height best suited for your lawn.
PT
To adjust the blade height:
Disconnect power supply.
IT
To raise the blade height, use both hands to adjust the blade height adjustment
wheels.
Connect to power supply when you are ready to mow.
EL
PL
Installing/Removing extension cord
RU
Insert the female end of the extension cord into the product.
Connect the male end of the extension cord to the power source.
KZ
Make sure the extension cord is secured before beginning operation.
UA
Starting/Stopping the mower
RO
Connect to power supply.
Press and hold the switch button
EN the switch button
To stop the mower,release the switch bar
making any adjustments to the mower.
Attention during operation
Firmly hold the handle with both hands when mowing.
Start mowing near the power socket to ensure that the extension cord does not become an
obstacle.
Do not allow the extension cord to pass under or become entangled beneath the machine.
Do not try to cut long grass all at once. Instead, mow the lawn in steps. Leave a day or two
between mowings until the lawn becomes evenly short.
When mowing at the edge, be sure to face the left side of the machine toward the edge, and
then move the machine along the edge.
WARNING:
The mower must be left outdoors for at least two hours before entering inside
a building.
. Pull the switch bar
2
to start the mower.
2
The mower can only be used outdoors, and in no case in a building.
toward the handle and release
1
. Let the blade come to a complete stop before
1
236 236
of the four
16