Overview Of The Connection States; Care And Maintenance; Cleaning; Maintenance - Sartorius PMA.Vision Instrucciones De Instalación

t
Go into the submenu "Ethernet".
t
Go into the submenu "Device ID".
t
Select "t" to enter a new device ID.
t
Enter a new device ID in the displayed input field.
Only letters, numbers and hyphens may be used.
t
Confirm with the "i" key.

4.4 Overview of the Connection States

Symbol Meaning
Symbol Meaning

5 Care and Maintenance

5.1 Cleaning

Electrical hazard from voltage or current!
Disconnect the AC adapter (if connected) from
the mains. Unplug any connected data cables
from the ex-link converter. Never open the scale
or the AC adapter.
The parts contained in these cannot be cleaned,
repaired, or replaced by the operator.
− Make sure that no liquid or dust gets into the scale or the
AC adapter.
− Only use soft brushes and cloths for cleaning.
− Never use cleaning agents that contain solvents or
abrasive ingredients (e.g. scouring cream, steel wool),
which can ultimately damage the equipment.
Do not clean the following parts with acetone or
aggressive cleaning agents:
mains socket, data interface, labels, and all other
plastic parts.
Cleaning the Control Panel
t
Turn off the device before cleaning the control panel since
touching the screen could trigger unwanted inputs.
Cleaning the Scale Housing
t
Clean the device using a mild cleaning agent.
t
Use a soft cloth to dry the device.

5.2 Maintenance

Electrical hazard from voltage or current!
Repair work on the (optional) AC adapter must
only be carried out by trained service
technicians. Contact the Sartorius Service Center
or a Sartorius dealer for proper repairs.
To ensure the continued accuracy of your scale, we
recommend scheduling regular servicing at least once a year.
The Sartorius Service Center offers different service contracts
with maintenance intervals that are tailored to your needs.
A calibration certificate should always be issued as part of
every maintenance session. Safety inspections of the AC
adapter and its connections must be performed at appropriate
intervals by a qualified electrician (e.g. every 2 years).
Installation Instructions VIS1X
English
11