Kohler K-110 Instrucciones De Instalación página 7

INSTALL ANTIQUE, FINIAL AND REVIVAL
LEVER HANDLES
Insert the handle onto the stem extension so it is situated
horizontally. Insert the stem screw into the stem
extension, and tighten with a Phillips screwdriver.
CAUTION: Risk of product damage. Do not
overtighten. Overtightening may cause damage to
handle.
Repeat this procedure for the other handle.
NOTE: For fine adjustment, pull out the stem extension
until it disengages from the valve, rotate, and return the
stem extension to its original position. Do not pull the
stem extension out completely.
Run hot and cold water through the faucet and hand
shower to remove any debris. Check for leaks.
INSTALL SIX-PRONG BATH HANDLES
Insert the stem screw into the stem extension, and tighten
with a Phillips screwdriver.
CAUTION: Risk of product damage. Do not
overtighten. Overtightening may cause damage to
handle.
Loosen the setscrew, and position the handle onto the
stem extension. Remove the handle, and rotate it one
spline clockwise or counterclockwise to achieve an even,
horizontal positioning of the labels.
NOTE: For fine adjustment, pull out the stem extension
until it disengages from the valve, rotate, and return the
stem extension to its original position. Do not pull the
stem extension out completely.
Tighten the setscrew. Repeat this procedure for the other
handle.
Run hot and cold water through faucet and handshower
to remove any debris. Check for leaks.
D
1008209-2-
Bonnet
Stem
Extension
Open
HOT
Close Shown In Closed Position
Bonnet
Stem
Extension
Open
Close
Shown In Closed Position
Fig. #18
7
Lever Handle
Stem Screw
COLD
Fig. #17
Setscrew
Stem
Screw
Six-Prong
Handle
Open
Close
Open
Close
Kohler Co.